3 Replies Latest reply on May 21, 2015 11:00 AM by kaifeng zeng

    TabJolt Timeout of Waiting for processes "Windows Perf Counter Data Retriever"

    Masashi Omote

      Followed all the steps from installation guide, when running TabJolt test, process is exiting with below error.


      I couldn't identify the cause of this error. What should I do to make this work?


      --------------------------------------------------------------------------------------------------------------------------------------------------------------------------

      C:\Users\Administrator\Desktop\tabjolt> go --t=testplans\InteractVizLoadTest.jmx --d=230 --c=1

      Perf harness is started with parameters: --rootPath=C:\Users\Administrator\Desktop\tabjolt --t=testplans\InteractVizLoadTest.jmx --d=230 --c=1

      -------------start windows performance counters collection-------------

      Output File:c:\users\administrator\desktop\tabjolt/results/2015-05-20_13-46-16/wincounter.tsv

      -------------start collecting JMX counters--------------

      Output File:C:\Users\Administrator\Desktop\tabjolt/results/2015-05-20_13-46-16/jmxcounter.tsv

      -------------start collecting Zabbix counters--------------

      Output File:C:\Users\Administrator\Desktop\tabjolt/results/2015-05-20_13-46-16/zabbixcounter.tsv

      -------------start Jmeter load test run-------------

      Output file: C:\Users\Administrator\Desktop\tabjolt/results/2015-05-20_13-46-16/result.jtl

      Command: [C:\Users\Administrator\Desktop\tabjolt/bin/jmeter.bat, -n, -t=C:\Users\Administrator\Desktop\tabjolt//testplans\InteractVizLoadTest.jmx, -j=

      C:\Users\Administrator\Desktop\tabjolt/logs/jmeter_2015-05-20_13-46-16.log, -JthreadCount=1, -Jduration=230, -JconfigFolderPath=C:\Users\Administrator

      \Desktop\tabjolt/config/, -Jlogpath=C:\Users\Administrator\Desktop\tabjolt/results/2015-05-20_13-46-16/result.jtl]

      Created the tree successfully using C:\Users\Administrator\Desktop\tabjolt//testplans\InteractVizLoadTest.jmx

      Starting the test @ Wed May 20 13:46:18 JST 2015 (1432097178710)

      Waiting for possible shutdown message on port 4445

      Tidying up ...    @ Wed May 20 13:46:19 JST 2015 (1432097179460)

      ... end of run

      Jmeter process has exited. Waiting for the other processes to exit.

      Waiting for processes "Windows Perf Counter Data Retriever" to complete. 30 seconds have elapsed.

      Waiting for processes "Windows Perf Counter Data Retriever" to complete. 60 seconds have elapsed.

      Waiting for processes "Windows Perf Counter Data Retriever" to complete. 90 seconds have elapsed.

      Waiting for processes "Windows Perf Counter Data Retriever" to complete. 120 seconds have elapsed.

      Waiting for processes "Windows Perf Counter Data Retriever" to complete. 150 seconds have elapsed.

      Timeout of Waiting for processes "Windows Perf Counter Data Retriever" to complete. Killinng the processes.

      killing process Windows Perf Counter Data Retriever

      Successfully killed process Windows Perf Counter Data Retriever

      All processes have exited.

      -------------start processing perf counters and run result-------------

      Unable to parse line "1432097342320     LOCALHOST       LogicalDisk     Current D"

      Finished processing all perf counter records

      Finish processeing all Jmeter perf result samples.

      Failed to process perf counters and run result.

      org.postgresql.util.PSQLException: ERROR: 0 ????????????

        ??: SQL? "UPDATE test_runs

                      SET TPS_average=(

                                   totalSamples/totalseconds

                               )

                      WHERE id=runId"

      PL/pgSQL??sp_update_test_run_stats(integer)?116????SQL ???????

              at org.postgresql.core.v3.QueryExecutorImpl.receiveErrorResponse(QueryExecutorImpl.java:2161)

              at org.postgresql.core.v3.QueryExecutorImpl.processResults(QueryExecutorImpl.java:1890)

              at org.postgresql.core.v3.QueryExecutorImpl.execute(QueryExecutorImpl.java:255)

              at org.postgresql.jdbc2.AbstractJdbc2Statement.execute(AbstractJdbc2Statement.java:560)

              at org.postgresql.jdbc2.AbstractJdbc2Statement.executeWithFlags(AbstractJdbc2Statement.java:417)

              at org.postgresql.jdbc2.AbstractJdbc2Statement.executeUpdate(AbstractJdbc2Statement.java:359)

              at com.tableausoftware.test.tools.ResultProcessor.DBHelper.updateTestRunStats(DBHelper.java:189)

              at com.tableausoftware.test.tools.ResultProcessor.ResultProcessor.startProcessing(ResultProcessor.java:86)

              at com.tableausoftware.test.tools.perfRunHarness.Main.startPerfResultsSaver(Main.java:111)

              at com.tableausoftware.test.tools.perfRunHarness.Main.main(Main.java:77)

      --------------------------------------------------------------------------------------------------------------------------------------------------------------------------

        • 1. Re: TabJolt Timeout of Waiting for processes "Windows Perf Counter Data Retriever"
          Russell Christopher

          Assuming everything is configured correctly, you should start seeing test results after the lin


          Waiting for possible shutdown message on port 4445

           

          The fact that the "end of run" immediately pops up indicates no tests were actually loaded up to run. Are you using vizpool.csv or a database to load up the vizzes to execute? Posting your config files would also be helpful.


          • 2. Re: TabJolt Timeout of Waiting for processes "Windows Perf Counter Data Retriever"
            Masashi Omote

            Russell Christopher

             

            Thank you for your answer.

            I checked configuration , then Tableau Server's version is 8.3. This is the cause of that error.

             

            I update Tableau Server to version 9.0 , but another error is occured.

            Error message says "Unable to parse line "</sample>" ", but I couldn't found "</sample>" in config files.

             

            I have attached config file. Is there any mistake in my config files ?

             

            >Are you using vizpool.csv or a database to load up the vizzes to execute?

            I user vizpool.csv to execute.

             

            Test Result

            ---------------------------------------------------------------------------------------------------------------------------------------------------

            C:\Users\Administrator\Desktop\TabjoltForTableauServer9>go --t=testplans\InteractVizLoadTest.jmx --d=10 --c=1

            Perf harness is started with parameters: --rootPath=C:\Users\Administrator\Desktop\TabjoltForTableauServer9 --t=testplans\InteractVizLoadTest.jmx --d=

            10 --c=1

            -------------start collecting JMX counters--------------

            Output File:C:\Users\Administrator\Desktop\TabjoltForTableauServer9/results/2015-05-21_11-52-47/jmxcounter.tsv

            -------------start collecting Zabbix counters--------------

            Output File:C:\Users\Administrator\Desktop\TabjoltForTableauServer9/results/2015-05-21_11-52-47/zabbixcounter.tsv

            -------------start windows performance counters collection-------------

            Output File:c:\users\administrator\desktop\tabjoltfortableauserver9/results/2015-05-21_11-52-47/wincounter.tsv

            -------------start Jmeter load test run-------------

            Output file: C:\Users\Administrator\Desktop\TabjoltForTableauServer9/results/2015-05-21_11-52-47/result.jtl

            Command: [C:\Users\Administrator\Desktop\TabjoltForTableauServer9/bin/jmeter.bat, -n, -t=C:\Users\Administrator\Desktop\TabjoltForTableauServer9//test

            plans\InteractVizLoadTest.jmx, -j=C:\Users\Administrator\Desktop\TabjoltForTableauServer9/logs/jmeter_2015-05-21_11-52-47.log, -JthreadCount=1, -Jdura

            tion=10, -JconfigFolderPath=C:\Users\Administrator\Desktop\TabjoltForTableauServer9/config/, -Jlogpath=C:\Users\Administrator\Desktop\TabjoltForTablea

            uServer9/results/2015-05-21_11-52-47/result.jtl]

            Created the tree successfully using C:\Users\Administrator\Desktop\TabjoltForTableauServer9//testplans\InteractVizLoadTest.jmx

            Starting the test @ Thu May 21 11:52:50 JST 2015 (1432176770958)

            Waiting for possible shutdown message on port 4445

            SLF4J: Class path contains multiple SLF4J bindings.

            SLF4J: Found binding in [jar:file:/C:/Users/Administrator/Desktop/TabjoltForTableauServer9/lib/slf4j-nop-1.7.5.jar!/org/slf4j/impl/StaticLoggerBinder.

            class]

            SLF4J: Found binding in [jar:file:/C:/Users/Administrator/Desktop/TabjoltForTableauServer9/lib/ext/slf4j-nop-1.7.7.jar!/org/slf4j/impl/StaticLoggerBin

            der.class]

            SLF4J: See http://www.slf4j.org/codes.html#multiple_bindings for an explanation.

            SLF4J: Actual binding is of type [org.slf4j.helpers.NOPLoggerFactory]

            #0      Threads: 1/1    Samples: 1      Latency: 0      Resp.Time: 3561 Errors: 1

            #1      Threads: 1/1    Samples: 1      Latency: 0      Resp.Time: 1888 Errors: 1

            #2      Threads: 1/1    Samples: 1      Latency: 0      Resp.Time: 1381 Errors: 1

            #3      Threads: 1/1    Samples: 1      Latency: 0      Resp.Time: 1259 Errors: 1

            #5      Threads: 1/1    Samples: 1      Latency: 0      Resp.Time: 1206 Errors: 1

            Tidying up ...    @ Thu May 21 11:53:04 JST 2015 (1432176784077)

            ... end of run

            Jmeter process has exited. Waiting for the other processes to exit.

            Waiting for processes "Windows Perf Counter Data Retriever" to complete. 30 seconds have elapsed.

            All processes have exited.

            -------------start processing perf counters and run result-------------

            Unable to parse line "</sample>"

            javax.xml.bind.UnmarshalException

            - with linked exception:

            [org.apache.xerces.impl.io.MalformedByteSequenceException: Invalid byte 1 of 1-byte UTF-8 sequence.]

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.createUnmarshalException(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(Unknown Source)

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(Unknown Source)

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(Unknown Source)

                    at com.tableausoftware.test.tools.ResultProcessor.JmeterResultFileParser.parseFile(JmeterResultFileParser.java:96)

                    at com.tableausoftware.test.tools.ResultProcessor.AbstractFileParser.run(AbstractFileParser.java:55)

                    at com.tableausoftware.test.tools.ResultProcessor.JmeterResultFileParser.run(JmeterResultFileParser.java:39)

                    at java.lang.Thread.run(Unknown Source)

            Caused by: org.apache.xerces.impl.io.MalformedByteSequenceException: Invalid byte 1 of 1-byte UTF-8 sequence.

                    at org.apache.xerces.impl.io.UTF8Reader.invalidByte(Unknown Source)

                    at org.apache.xerces.impl.io.UTF8Reader.read(Unknown Source)

                    at org.apache.xerces.impl.XMLEntityScanner.load(Unknown Source)

                    at org.apache.xerces.impl.XMLEntityScanner.scanLiteral(Unknown Source)

                    at org.apache.xerces.impl.XMLScanner.scanAttributeValue(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanAttribute(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.scanRootElementHook(Unknown Source)

                    at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)

                    at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)

                    at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)

                    at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)

                    at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)

                    at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)

                    at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)

                    ... 8 more

            Unable to parse line "</sample>"

            javax.xml.bind.UnmarshalException

            - with linked exception:

            [org.apache.xerces.impl.io.MalformedByteSequenceException: Invalid byte 1 of 1-byte UTF-8 sequence.]

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.createUnmarshalException(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(Unknown Source)

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(Unknown Source)

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(Unknown Source)

                    at com.tableausoftware.test.tools.ResultProcessor.JmeterResultFileParser.parseFile(JmeterResultFileParser.java:96)

                    at com.tableausoftware.test.tools.ResultProcessor.AbstractFileParser.run(AbstractFileParser.java:55)

                    at com.tableausoftware.test.tools.ResultProcessor.JmeterResultFileParser.run(JmeterResultFileParser.java:39)

                    at java.lang.Thread.run(Unknown Source)

            Caused by: org.apache.xerces.impl.io.MalformedByteSequenceException: Invalid byte 1 of 1-byte UTF-8 sequence.

                    at org.apache.xerces.impl.io.UTF8Reader.invalidByte(Unknown Source)

                    at org.apache.xerces.impl.io.UTF8Reader.read(Unknown Source)

                    at org.apache.xerces.impl.XMLEntityScanner.load(Unknown Source)

                    at org.apache.xerces.impl.XMLEntityScanner.scanLiteral(Unknown Source)

                    at org.apache.xerces.impl.XMLScanner.scanAttributeValue(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanAttribute(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.scanRootElementHook(Unknown Source)

                    at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)

                    at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)

                    at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)

                    at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)

                    at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)

                    at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)

                    at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)

                    ... 8 more

            Unable to parse line "</sample>"

            javax.xml.bind.UnmarshalException

            - with linked exception:

            [org.apache.xerces.impl.io.MalformedByteSequenceException: Invalid byte 1 of 1-byte UTF-8 sequence.]

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.createUnmarshalException(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(Unknown Source)

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(Unknown Source)

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(Unknown Source)

                    at com.tableausoftware.test.tools.ResultProcessor.JmeterResultFileParser.parseFile(JmeterResultFileParser.java:96)

                    at com.tableausoftware.test.tools.ResultProcessor.AbstractFileParser.run(AbstractFileParser.java:55)

                    at com.tableausoftware.test.tools.ResultProcessor.JmeterResultFileParser.run(JmeterResultFileParser.java:39)

                    at java.lang.Thread.run(Unknown Source)

            Caused by: org.apache.xerces.impl.io.MalformedByteSequenceException: Invalid byte 1 of 1-byte UTF-8 sequence.

                    at org.apache.xerces.impl.io.UTF8Reader.invalidByte(Unknown Source)

                    at org.apache.xerces.impl.io.UTF8Reader.read(Unknown Source)

                    at org.apache.xerces.impl.XMLEntityScanner.load(Unknown Source)

                    at org.apache.xerces.impl.XMLEntityScanner.scanLiteral(Unknown Source)

                    at org.apache.xerces.impl.XMLScanner.scanAttributeValue(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanAttribute(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.scanRootElementHook(Unknown Source)

                    at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)

                    at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)

                    at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)

                    at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)

                    at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)

                    at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)

                    at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)

                    ... 8 more

            Unable to parse line "</sample>"

            javax.xml.bind.UnmarshalException

            - with linked exception:

            [org.apache.xerces.impl.io.MalformedByteSequenceException: Invalid byte 1 of 1-byte UTF-8 sequence.]

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.createUnmarshalException(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(Unknown Source)

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(Unknown Source)

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(Unknown Source)

                    at com.tableausoftware.test.tools.ResultProcessor.JmeterResultFileParser.parseFile(JmeterResultFileParser.java:96)

                    at com.tableausoftware.test.tools.ResultProcessor.AbstractFileParser.run(AbstractFileParser.java:55)

                    at com.tableausoftware.test.tools.ResultProcessor.JmeterResultFileParser.run(JmeterResultFileParser.java:39)

                    at java.lang.Thread.run(Unknown Source)

            Caused by: org.apache.xerces.impl.io.MalformedByteSequenceException: Invalid byte 1 of 1-byte UTF-8 sequence.

                    at org.apache.xerces.impl.io.UTF8Reader.invalidByte(Unknown Source)

                    at org.apache.xerces.impl.io.UTF8Reader.read(Unknown Source)

                    at org.apache.xerces.impl.XMLEntityScanner.load(Unknown Source)

                    at org.apache.xerces.impl.XMLEntityScanner.scanLiteral(Unknown Source)

                    at org.apache.xerces.impl.XMLScanner.scanAttributeValue(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanAttribute(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.scanRootElementHook(Unknown Source)

                    at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)

                    at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)

                    at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)

                    at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)

                    at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)

                    at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)

                    at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)

                    ... 8 more

            Unable to parse line "</sample>"

            javax.xml.bind.UnmarshalException

            - with linked exception:

            [org.apache.xerces.impl.io.MalformedByteSequenceException: Invalid byte 1 of 1-byte UTF-8 sequence.]

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.createUnmarshalException(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(Unknown Source)

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(Unknown Source)

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(Unknown Source)

                    at com.tableausoftware.test.tools.ResultProcessor.JmeterResultFileParser.parseFile(JmeterResultFileParser.java:96)

                    at com.tableausoftware.test.tools.ResultProcessor.AbstractFileParser.run(AbstractFileParser.java:55)

                    at com.tableausoftware.test.tools.ResultProcessor.JmeterResultFileParser.run(JmeterResultFileParser.java:39)

                    at java.lang.Thread.run(Unknown Source)

            Caused by: org.apache.xerces.impl.io.MalformedByteSequenceException: Invalid byte 1 of 1-byte UTF-8 sequence.

                    at org.apache.xerces.impl.io.UTF8Reader.invalidByte(Unknown Source)

                    at org.apache.xerces.impl.io.UTF8Reader.read(Unknown Source)

                    at org.apache.xerces.impl.XMLEntityScanner.load(Unknown Source)

                    at org.apache.xerces.impl.XMLEntityScanner.scanLiteral(Unknown Source)

                    at org.apache.xerces.impl.XMLScanner.scanAttributeValue(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanAttribute(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.scanRootElementHook(Unknown Source)

                    at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)

                    at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)

                    at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)

                    at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)

                    at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)

                    at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)

                    at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)

                    ... 8 more

            Unable to parse line "</sample>"

            javax.xml.bind.UnmarshalException

            - with linked exception:

            [org.apache.xerces.impl.io.MalformedByteSequenceException: Invalid byte 1 of 1-byte UTF-8 sequence.]

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.createUnmarshalException(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(Unknown Source)

                    at com.sun.xml.internal.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(Unknown Source)

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(Unknown Source)

                    at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(Unknown Source)

                    at com.tableausoftware.test.tools.ResultProcessor.JmeterResultFileParser.parseFile(JmeterResultFileParser.java:96)

                    at com.tableausoftware.test.tools.ResultProcessor.AbstractFileParser.run(AbstractFileParser.java:55)

                    at com.tableausoftware.test.tools.ResultProcessor.JmeterResultFileParser.run(JmeterResultFileParser.java:39)

                    at java.lang.Thread.run(Unknown Source)

            Caused by: org.apache.xerces.impl.io.MalformedByteSequenceException: Invalid byte 1 of 1-byte UTF-8 sequence.

                    at org.apache.xerces.impl.io.UTF8Reader.invalidByte(Unknown Source)

                    at org.apache.xerces.impl.io.UTF8Reader.read(Unknown Source)

                    at org.apache.xerces.impl.XMLEntityScanner.load(Unknown Source)

                    at org.apache.xerces.impl.XMLEntityScanner.scanLiteral(Unknown Source)

                    at org.apache.xerces.impl.XMLScanner.scanAttributeValue(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanAttribute(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanStartElement(Unknown Source)

                    at org.apache.xerces.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.scanRootElementHook(Unknown Source)

                    at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)

                    at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)

                    at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)

                    at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)

                    at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)

                    at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)

                    at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown Source)

                    ... 8 more

            Finished processing all perf counter records

            Finish processeing all Jmeter perf result samples.

            -----------------------------------------------------

            Perf run result have been stored. Please use this RUN ID 4 to view your result in Tableau

             

            ---------------------------------------------------------------------------------------------------------------------------------------------------

            • 3. Re: TabJolt Timeout of Waiting for processes "Windows Perf Counter Data Retriever"
              kaifeng zeng

              Could you please share this folder D:\Tabjolt\results\2015-03-11_09-51-19 (pick the latest result folder which is corresponding to your run)? Tabjolt was not able to parse the output result file from Jmeter.